R-Works Fatbar36是一款极致轻盈的摩托车越野车把。Renthals 36Tech车把标准和专有Zarilium材料相结合，以尽可能低的重量生产出高强度车把，比标准直径为28mm的Fatbar轻36%
36mm夹紧直径可将扭转安全性提高59%
Bm是从安装直径中心线到钢筋端部中心的垂直测量值，与Twinwall和Fatbar的尺寸相比，它总是低4mm
Bv是从Fatbar36基线到杆端中心的垂直测量值，这是与Twinwall或Fatbar相比Fatbar36的真实高度<注：22mm和28mm夹具均不能与Renthal R-Works Fatbar36车把配合使用。必须单独购买新的36Tech杆支架，才能将车把安装到原装三夹钳上
The R-Works Fatbar36 is the ultimate lightweight motocross handlebar. Renthals 36Tech handlebar standard and proprietary Zarilium material are combined to produce a high-strength handlebar at the lowest possible weight, 36% lighter than the standard 28mm diameter Fatbar..
Zarilium allow features 20% greater tensile strength than 7010-T6 aluminum.
Handlebar tapers to 22mm at each end to work with standard controls.
36mm clamping diameter improves torsional security by 59%.
Bm is the vertical measurement from the center line of the mounting diameter to the center of the end of the bars, it will always be 4mm lower when comparing dimensions to Twinwall and Fatbars.
Bv is the vertical measurement from the baseline of the Fatbar36 to the center of the end of the bars, this is the true height of the Fatbar36 when comparing to a Twinwall or Fatbar.
Note: Neither 22mm nor 28mm clamps will work with the Renthal R-Works Fatbar36 handlebars. New 36Tech bar mounts must be purchased separately to fit the handlebars to your original triple clamps..
常见问题
- 关于价格：您看到的价格，即为您到手的价格，这里包含了国外商品的采购价格，国际物流运费和关税以及代购费用。
- 关于物流：我们一般选择国际商业快递保证时效，大概2周左右能够到您手上，对于疫情通关等特殊原因，如果有一些延误，我们会及时和下单客户沟通。标有国内现货标识的商品1个工作日内国内发货。
- 如有特殊情况，您在下单后或者咨询时，客服会跟你确认或者调整。这主要是由于海外直邮时不同的商品体积差别和关税差别较大，因此商品的代购价格就会存在一定的差错失误。
- 如有问题，欢迎添加客服微信:freedomenduro 随时沟通咨询。
相关推荐
Product title
Vendor
¥19.99 | ¥24.99
Product title
Vendor
¥19.99 | ¥24.99
Product title
Vendor
¥19.99 | ¥24.99
Product title
Vendor
