Klim F5下巴通风摄像头支架
为动作相机寻找一个集成的、低姿态的头盔支架的工作已经结束。Klim F5下巴通风摄像头安装架专为GoPro等相机打造，可无缝地卡入下巴通风孔，安全地固定相机，而不会消除通过通风孔的气流。支架的中心位置意味着头盔不会像侧面支架那样失去平衡，相机的重量接近重心。
特征：
- 安装在库存头盔接口的位置
- Abs+聚碳酸酯结构
- 无需胶水或胶带
- 专为动作相机设计，如gopro 5和更高版本
- 与gopro型安装和配件兼容
- 低轮廓，中心安装位置，平衡头盔
- 允许向上/向下调整相机角度
- 头盔通风不受影响
- 包括连接至相机或支架的固定系绳
- 将系绳环固定到头盔带上
- 使用相机现有的带帽螺母和指旋螺钉
- 包括盖螺母
- 使用相机中现有的指旋螺钉
规格：
如何使用：
- 从头盔上取下枪托
- 从下巴杆内侧推动顶部或底部释放卡舌（网眼后面）
- 安装支架之前不要连接摄像头
- 首先推入顶部，然后向下转动支座至座椅底部凸耳
- 当凸耳就位时，听到咔哒声
- 确认顶部和底部凸舌完全就位（位于网格后面）
- 对于摄像机安装，使用摄像机现有的带帽螺母和指旋螺钉
- 若要移除，请从下巴杆内侧推动顶部或底部释放卡舌（网眼后面）
兼容性：
内容：
Klim F5 Chin Vent Camera Mount
The search for an integrated, low-profile helmet mount for action cameras is over. Built for cameras such as the GoPro, the Klim F5 Chin Vent Camera Mount seamlessly snaps into place in the chin vent, securely holding your camera without eliminating airflow through the vent. The centered position of the mount means your helmet isn’t off balance as it would be with a side mount, and the weight of the camera is close to the center of gravity.
Features:
- Installs in place of stock helmet mouthpiece
- Abs + polycarbonate construction
- No glue or adhesive tape required
- Designed for action cameras such as gopro 5 and newer
- Compatible with gopro-style mount and accessories
- Low-profile, center mount position for balanced helmet
- Allows for up/down camera angle adjustment
- Helmet ventilation is not compromised
- Included retention tether attaches to camera or mount
- Retention tether loops to helmet strap
- Uses existing cap nut and thumb screw from camera
- Cap nut included
- Uses existing thumb screw from camera
Specifications:
How to use:
- Remove stock mouthpiece from helmet
- Push top or bottom release tab (behind mesh) from inside the chin bar
- Do not attach camera until mount is installed
- Push top in first, then pivot mount down to seat bottom tab
- Listen for audible click when tabs seat into place
- Confirm top and bottom tabs are fully seated (behind mesh)
- For camera install, use existing cap nut and thumb screw from camera
- To remove, push the top or bottom release tab (behind mesh) from inside the chin bar
Compatibility:
Contents:
- 1x Klim F5 Chin Vent Camera Mount
